ETFE Powder SF-4011BK with MFR 10-20 for Powder Coating
Product Description
Ethylene-tetrafluoroethylene, also known as ETFE, is one of the strongest fluorine plastics with good mechanical properties, weather resistance, flame retardant, gas barrier properties and chemical resistance. In addition to the similar properties like other fluorine resins, it also shows good radiation resistance, strong adhesion with metal surface, and is lighter than other fluorinated materials.
Grades
| Grade | Appearance | Characteristic | Application |
| SF-4011 | White powder | Large particle size, thick coating, transparent coating | heavy corrosion, electrostatic powder coating |
| SF-4012 | White powder | Small particle size, thin coating, transparent coating | electrostatic powder coating |
| SF-4011BK | Black powder | Black coating | Black electrostatic powder |
| SF-4011WT | White powder | White coating | White electrostatic powder |
| SF-4011GN | Green powder | Green coating | Green electrostatic powder |
| SF-4013 | White powder | Transparent coating | Roto molding coating powder |
Properties
| Property | Unit | Method | SF-4011 | SF-4012,SF-4011BK,
SF-4011WT,SF-4011GN | SF-4013 |
| Average Particle Size | μm | Laser Particle Size Analyzer | 70-120 | 40-70 | 250-500 |
| MFR | g/10min | ASTM D1238(297℃,49N) | 10-20 | 20-30 |
| Apparent Density | g/ml | ISO60:2000 | ≥ 0.6 | ≥ 0.7 |
| Melting Point | ℃ | DSC | 220-270 |
| Specific Gravity | g/cm³ | ASTM D792 | 1.70-1.82 |
| Hardness Durometer | °/Shore D | GB/T 2411-2008 | ≥ 50 |
| Tensile Strength | MPa | ASTM D638 | ≥ 30 |
| Elongation | % | ASTM D638 | ≥ 300 |
Attention
1. When dealing with ETFE powder for deep processing, operators must wear protective cloth and mask to avoid potential safety hazards, such as inhalation of dust and toxic gas, or hurt by high temperature. No open flame and smoking in workplace. Exhaust devices should be installed.
2. When dealing with ETFE pellet for deep processing, operators must strictly control processing technic. Processing temperature should not be kept no more than 350℃. Wear protective cloth and mask to avoid potential safety hazards, such as inhalation of dust and toxic gas, or hurt by high temperature. The workplace should be tidy and ventilated.
3. Product waste must be handled properly following local laws and regulations.
Packaging, Transportation and Storage
1. Double-layered polyethylene sealed and then packed in carton. 10Kg/bag, 20Kg/carton.
2. The product should be stored in cool ventilated place and away from fire source and heat source. It should also be prevented against moisture and sunshine, kept in upright position and handled with great care.
3. Once opened, unused product should be repacked to avoid any dust or contamination.
Product Tags:
|
|
SF-4011BK MFR 10-20 ETFE Coating Powder For Electrostatic Coating Images
|
